Patio Misting: A Complete How-To and Overview
Patio misting is the simplest way to make a hot patio usable again. PatioMisting.co walks you through how patio misting works, how to plan a layout, and how to install The Patio Misting System yourself in about 2 hours.
Shop The Patio Misting System ProVisit ThePatioMistingSystem.com
Quick answer: how do you set up patio misting?
To set up patio misting with The Patio Misting System: measure your patio edge, anchor the 1/4" tubing to the structure with nozzle ports facing out, attach nozzles leaving one off, connect the pump to a garden hose and outlet, then flush and check for leaks. Most installs take about 2 hours.
The patio misting install in 5 steps
This is the process taught at PatioMistingSystemInstallation.com, summarized.
1. Prepare and measure
Measure the run and plan where the pump will sit.
2. Anchor the tubing
Use screws suited to wood, stucco/concrete or metal; keep ports facing outward.
3. Attach nozzles
Install nozzles and connect tubing, leaving one nozzle off for flushing.
4. Set up the pump
Connect the garden-hose inlet and plug in through the GFCI plug.
5. Flush and inspect
Run water to clear debris, add the last nozzle, then check for leaks.
Then enjoy
Start the mist from Bluetooth or the remote.
Patio misting overview
Patio misting systems push water through small nozzles to create a cloud of fine droplets. As those droplets evaporate, they cool the air around your seating area.
The Patio Misting System uses a 1000 PSI pump, so its patio misting produces droplets that evaporate before settling. A cheaper hose-only setup can't create the same fine mist.
Planning your patio misting layout
Run the line along the outside edge of a cover, pergola or awning. About 40 nozzles is typical when mixing sizes, according to the installation guide, and spacing depends on your patio's shape.
The pump can sit away from the patio with no pressure loss, and the nozzle run can go up to 100 ft.
Patio misting maintenance
Clean nozzles with vinegar or CLR for 30 minutes if they clog. Use the calcium inhibitor filter, and consider two inline filters in hard water. Change pump oil with the syringe (5W-30 recommended). Full manuals are linked at PatioMistingSystemInstallation.com.
What's in The Patio Misting System Pro – 100 ft kit
- 1000 PSI Mist Pump Pro (oil-lubricated, 3-piston)
- 50 stainless steel nozzles in mixed sizes
- 50 quick-connect couplers with nozzle holes
- 50 C-clamps for mounting
- 3 end caps with nozzle hole
- 5 90° L connectors and 2 T connectors
- 2 straight 1/4" fittings (no hole)
- 100 ft of 1/4" OD mist line tubing
- Garden-hose inlet hookup
- Calcium inhibitor filter
- GFCI plug
- Tube cutter
- Oil syringe (5W-30 recommended; oil not included)
- Extra O-rings
The Patio Misting System Pro powers patio misting with an oil-lubricated, 3-piston, 1000 PSI pump that connects to a hose and an outlet, offers Bluetooth plus remote control, and runs under 56 dB. Stainless nozzles and connectors come standard, and a free 1-year warranty covers the kit.
See the Pro kit
How to choose a Patio Misting System
- Decide coverage. Patio misting kits are sized by linear feet; the Pro covers 20 to 100 ft.
- Check your utilities. You need a hose spigot and a standard outlet nearby, or a route to them.
- Choose mount height. Higher mounts give more evaporation time.
- Pick nozzles. Bigger .3mm for dry heat and high mounts; smaller for gentler mist.
- Plan for water quality. A filter protects patio misting nozzles from calcium.
Step-by-step photos and FAQs are in the Patio Misting System installation guide.
Shipping your patio misting kit
Every patio misting kit ships by UPS out of Phoenix, Arizona, normally within 24 to 48 hours of ordering. US standard shipping takes 3 to 7 business days; priority takes 1 to 3. No pickup.
Patio Misting FAQ
Is patio misting hard to install?
No. The Patio Misting System is a DIY kit; most installs take about 2 hours.
How many nozzles do I need for patio misting?
The installation guide says about 40 is common when mixing nozzle sizes.
Where should the pump go?
Anywhere convenient and shaded; it can sit far from the line without pressure loss.
How do I clean patio misting nozzles?
Soak them in vinegar or CLR for 30 minutes.
What oil does the pump use?
5W-30 is recommended; oil isn't included, but a syringe is.
Does patio misting work in humidity?
Less well. The Patio Misting System says 0 to 15° in high humidity, up to 30°F in dry heat.
Patio Misting blog
Start patio misting this weekend
The Patio Misting System Pro – 100 ft gives you everything needed for DIY patio misting, from pump to tube cutter, with a free 1-year warranty.
Buy The Patio Misting SystemRead the install guide